ITC-Audio T-6708 IP Network Adapter

ITC-Audio T- 6708 IP network adapter, is a revolutionary wall mountable IP adapter which can convert analog based amplifiers into IP based amplifier. Apart from converting conventional amplifier into a LAN/ WAN based amplifier, it offers a lot of advantages over conventional systems, like offering superior distance audio transmission, multi-tasking programming and allowing transmission of data at selected nodes or broad cast the data at all nodes.

ITC-Audio T-6708 is a wall mountable IP adapter having ability to extend the capacity of an analog amplifier to operate and transmit voice signal over LAN/ WAN network. The IP adapter,  can be installed any where on the LAN network allowing point to point & multi point communication between various nodes ( if multiple ITC-Audio T-6708 has been installed over the LAN Networks). The speaker are directly connected with  the amplifier, which is further connected to the ITC-Audio T-6708 network IP adapter.

Features
IP network audio adapter or decoder to work with external power amplifier.
Direct to receive internet audio source to decode into analog source as IP mixer pre amplifier.
Non-dedicated network system solution.
Could be installed anywhere of the LAN network.
Economy network audio solution for multiple small sized room applications.
Zone definition is done through software, each network audio adapter could be regard as one zone,or several audio adapters could be taken as one zone, moreover, several zones could be defined as group for synchronous operation.
Build-in order programmed collect module, it can realize the real time signal collect function

Connection Diagram

ITC-Audio T-6708, is directly connected to any conventional amplifier and is further connected the LAN network. This allows the user to reach out for the amplifier via local IP network, Multiple, amplifiers on IP network can be used as IP intercoms or for broad cast via IP microphone ( Model : ITC-T6702)

Features

Features

Features
IP network audio adapter or decoder to work with external power amplifier.
Direct to receive internet audio source to decode into analog source as IP mixer pre amplifier.
Non-dedicated network system solution.
Could be installed anywhere of the LAN network.
Economy network audio solution for multiple small sized room applications.
Zone definition is done through software, each network audio adapter could be regard as one zone,or several audio adapters could be taken as one zone, moreover, several zones could be defined as group for synchronous operation.
Build-in order programmed collect module, it can realize the real time signal collect function

Specifications

Product ModelT-6708
Working Temp5℃~40℃
Audio Output Impedance470Ω
S/N Ratio>70dB
Audio Output Level1000mV industry standard pressure line terminals
T.H.D≤0.3%
Output Frequency80Hz~16KHz
Sampling Rate8K~48KHz
Transfer Rate100Mbps
Audio ModeMP3/MP2
Communication ProtocolTCP/IP, UDP, IGMP (multicast)
Power Consumption≤8W
Network InputStandard RJ45 Input
Humidity20%~80% Relative humidity, without condensation
Power Supply~220V-240V 50/60Hz
Dimensions187 x 139 x 60mm
Weight1.36Kg

Videos

Downloads

Download brochure of T-6708

Reviews

There are no reviews yet.

Be the first to review “ITC-Audio T-6708 IP Network Adapter”

Your email address will not be published. Required fields are marked *